MCP App Store
by KeenEthics
NetPilot icon

NetPilot MCP Server for Claude and ChatGPT

By NetPilot

Overview

NetPilot is an AI agent for networks. From a plain-English prompt it designs, builds and validates real multi-vendor networks in your private network lab, a cloud VM with 17+ real network operating systems with containerlab, and builds Cisco Packet Tracer files with no VM. Use it for any network engineering question that needs a lab to learn or to validate. Certification lab: practice CCNA, CCNP and CCIE topics on real Cisco IOS, IOS XR and NX-OS CLIs, and download a Packet Tracer .pkt file for CCNA-level topologies. Vendor CLI lab: learn Junos, Arista EOS, Nokia SR Linux, SONiC, Palo Alto, FortiGate or MikroTik RouterOS on the real CLI. Technology lab: build VXLAN EVPN, BGP policy, OSPF, MPLS, segment routing, IPv6 or VLAN and STP topologies. Network design lab: turn a design into a running multi-vendor topology, proof of concept or digital twin. Network testing lab: reproduce a BGP, OSPF or EVPN fault, run a failure scenario or build a vendor-case reproduction. Pre-change validation lab: apply a route-map, ACL, prefix-list, OSPF cost or BGP policy change to the lab first and keep the before and after output for your change record. Migration lab: rehearse a Cisco to Arista, Juniper or Aruba cutover on the real CLIs. Claude builds the lab, deploys the devices, applies the configs and reads the CLI output, which you keep as evidence. Supported: Cisco IOS (IOL), IOS XR (XRd) and NX-OS, Arista EOS (cEOS), Juniper Junos (cRPD, vJunos), Nokia SR Linux, SONiC, FRR, Palo Alto PAN-OS, Fortinet FortiGate, Aruba AOS-CX, Dell OS10, MikroTik RouterOS and Linux hosts, full list: https://www.netpilot.io/supported-devices. SR Linux, FRR, Linux, MikroTik and SONiC are preinstalled, the rest install from the NetPilot app. No GNS3, EVE-NG or CML server to run. Claude starts and stops the VM only through start_vm and stop_vm. The tools act only on your own account's lab VM and saved designs, and NetPilot stores no chat content. Documentation: https://www.netpilot.io/docs/agent-route

How to connect

  1. Claude: Open the NetPilot listing in the Claude connectors directory and choose Connect. Claude listing NetPilot exposes 19 tools here.
  2. ChatGPT: Open the NetPilot listing in the ChatGPT app directory and choose Connect. ChatGPT listing NetPilot exposes 19 tools here.

Tools

design_topology

ChatGPT
Save a named network design (nodes, links, IPv4 plan; diagram derived) in the user's NetPilot workspace. The first build step of every lab: a lab on the VM continues with set_topology and set_configs, a Packet Tracer file with save_device_configs and export_pkt. Saving under an existing name replaces that design.

execute_commands

ChatGPT
Use this to run CLI commands on deployed routers, switches and firewalls in a lab: show commands to verify, config commands to change, standard confirm prompts answered, a command ending in ? lists the options. Not for FRR or Linux endpoints (run_vm_shell with docker exec) and never for devices outside the user's lab.

execute_dialog

ChatGPT
Use this for one interactive, multi-step dialog on the named devices, such as a banner, a confirmation or key generation: send and expect steps that run in order and end at a prompt. For single commands use execute_commands.

export_pkt

ChatGPT
Build a Cisco Packet Tracer .pkt file from a saved design and its configs for the user to download; the download needs their NetPilot sign-in. Only when the user asked for Packet Tracer, a .pkt file, NetAcad, devices only Packet Tracer has, or a saved Packet Tracer design. Re-runs the validator and refuses until blocking issues are fixed.

get_configs

ChatGPT
Use this to read a device's startup config file on the VM with line numbers, before editing it with set_configs merge. Not for a deployed device's running config, which execute_commands shows with show running-config.

lab_viewer

ChatGPT
Start the lab viewer for one deployed lab and return its link: the topology with a web console per device, open while the VM runs. Switches the viewer when another lab's is running. Needs a ready VM (vm_status ready); the link also shows in vm_status viewer once running. The delivery step of every lab build.

list_vm_shells

ChatGPT
Use this to list the VM's tracked background shells with status, elapsed time and byte counts, for example to confirm whether a deploy started after a lost answer. Entries expire five minutes after a shell exits.

read_configs

ChatGPT
Read the stored startup configs of a saved design, optionally for named hosts only. show_line_numbers: true returns line-numbered text — the form save_device_configs mode merge targets.

read_topology

ChatGPT
Read one saved design by name (nodes, links, Mermaid diagram, IP plan, whether configs exist, its for_pkt_export mode: an edit keeps it), or list every design in the user's NetPilot workspace when name is omitted. Saved designs persist.

run_vm_shell

ChatGPT
Use this to run one shell command on the user's lab VM: containerlab deploy, docker exec into a lab node (FRR vtysh, Linux endpoints), file reads. POSIX sh, 120 s in the foreground, run_in_background true for a deploy, then vm_shell_output. Not for router and switch CLI, which is execute_commands.

save_device_configs

ChatGPT
Use this to store, edit or remove device startup configs of a saved design (a Packet Tracer file, or lab configs while the VM is off). Packet Tracer configs are validated. Not for a running lab (set_configs).

set_configs

ChatGPT
Use this to write device startup config files on the VM before the deploy: mode replace writes a whole file, merge edits lines by number from get_configs. Not for a deployed lab, whose devices take changes through execute_commands, and not for FRR or linux_endpoint, which take no startup file.

set_topology

ChatGPT
Use this to write a lab's topology on the VM before the deploy: mode replace creates or overwrites the whole topology from nodes and links, merge adds nodes or links, delete removes the named ones. Not for a running lab's device config (execute_commands) and not for Packet Tracer designs (design_topology).

start_vm

ChatGPT
Start the user's lab VM and wait until it accepts lab tools. Creates the VM on first use (3-6 minutes); a warm start takes 1-2 minutes. Waits up to wait_seconds (0 starts it and returns at once) and returns the same object as vm_status; if ready is still false, call again to keep waiting. Safe to repeat. A running VM uses lab credits per hour.

stop_vm

ChatGPT
Stop the user's lab VM, ending credit use. Deployed labs stay on disk and return on the next start; shell and device CLI sessions end. Returns the credits charged for this run.

stop_vm_shell

ChatGPT
Use this to terminate a background shell by shell_id (SIGTERM, then SIGKILL after a grace period). It returns the final output and exit status. Not for a foreground command, which has already finished.

vendor_guide

ChatGPT
Operating notes for one device type: image, containerlab kind, interface naming, readiness signal, config save model and protocol quirks. Every lab chat: vm_status first, then this guide; its answer carries the lab and Packet Tracer workflows. packet_tracer returns the Packet Tracer catalog and rules. The containerlab device_type values are the names vm_status images and set_topology use. No argument lists them.

vm_shell_output

ChatGPT
Use this to read new output from a background shell started by run_vm_shell: shell_id from that call, wait_seconds to block, wait_for_pattern to return on a matching line, max_bytes to cap one read. Each call returns only bytes not served before. The whole output stays in the shell's log file on the VM until 5 minutes after the shell ends.

vm_status

ChatGPT
Current state of the user's NetPilot lab VM: whether lab tools can run now (ready), what to call next (next), lab credits, the idle-stop time, installed device images, deployed labs and the running lab viewer link (viewer). No side effects.

bash_output

Claude

design_topology

Claude

execute_commands

Claude

execute_dialog

Claude

export_pkt

Claude

generate_configs

Claude

get_configs

Claude

kill_bash

Claude

lab_viewer

Claude

list_bash_shells

Claude

list_vm_shells

Claude

read_configs

Claude

read_topology

Claude

run_bash

Claude

run_vm_shell

Claude

save_device_configs

Claude

set_configs

Claude

set_topology

Claude

start_vm

Claude

stop_vm

Claude

stop_vm_shell

Claude

vendor_guide

Claude

vm_shell_output

Claude

vm_status

Claude

Similar Apps

Listed on MCP App Store

Listed on MCP App Store

Add this badge to your site or README. It links to this page.

HTML

<a href="https://mcp-app-store.keenethics-labs.com/app/netpilot"><img src="https://mcp-app-store.keenethics-labs.com/badges/listed-on-mcp-app-store.svg" alt="Listed on MCP App Store" width="220" height="44"></a>

Markdown

[![Listed on MCP App Store](https://mcp-app-store.keenethics-labs.com/badges/listed-on-mcp-app-store.svg)](https://mcp-app-store.keenethics-labs.com/app/netpilot)