MCP App Store
by KeenEthics
Structomat icon

Structomat MCP Server for Claude

By Structomat

Overview

Structomat is an AI engineering agent for structural steel. This connector gives Claude engineering tools that return computed results, not just text. - analyze_frame: 3D finite-element analysis of a steel frame, from a template (portal frame building, mono-pitch canopy, multi-storey frame) or a JSON model. Linear or second order (P-Delta), with modal analysis. Returns the equilibrium check, deflections, sway, support reactions, member forces (envelope for EN 1990 or ASCE 7 sets), periods with mass participation, a preliminary AISC 360-16 LRFD check of every member (demand-to-capacity ratio) and a link showing the model and results in 3D. - check_steel_members: preliminary AISC 360-16 LRFD strength check of up to 50 steel members (IPE, HEA, HEB or I dimensions, RHS/SHS, CHS) under given forces: compression, tension, bending with lateral-torsional buckling, shear and interaction, with every step and its clause. - check_connection: utilisation of a standard steel connection (end plate, fin plate, beam to beam, base plate) under given member-end forces, with the governing component. - estimate_steel_cost: fabrication and erection cost of a steel structure, part by part from its IFC model, with the market band, cost drivers, a programme and embodied carbon. The IFC is read in memory and not stored. - estimate_portal_frame_steel: steel tonnage of a portal frame building (15-30 m span) by part, with a range and typical member sizes. - find_examples and get_connection: published steel projects, case studies, benchmarks and a library of checked steel connections. - about_structomat and list_services: what Structomat does, design codes, what to send and what comes back. - draft_project_request: prepares an e-mail draft for the user to review and send; it sends nothing. No sign-in. Every tool is read-only: nothing is changed, sent or stored. Results are analyses, preliminary checks and estimates for checking, comparing and budgeting, not a signed design.

How to connect

  1. Claude: Open the Structomat listing in the Claude connectors directory and choose Connect. Claude listing Structomat exposes 10 tools here.

Tools

about_structomat

Claude
Facts about Structomat, an AI engineering agent for structural steel: what it does, design codes, who signs designs for construction, what to send, what comes back, how to start. Use when the user asks about Structomat or how to engage it.

analyze_frame

Claude
Runs a 3D finite-element frame analysis and returns the numbers: equilibrium check, largest deflection along the members, largest joint displacement and sway in X and Y, every support reaction, the axial force, shears and moments of every member (the envelope with the governing combination when there are several), and natural periods with mass participation (modal analysis); linear or second order (P-Delta). The model is either a template (a pitched portal frame building, an open mono-pitch canopy, or a multi-storey frame, from a few dimensions, sections and loads) or a full model in JSON (nodes, members, sections, supports, loads, combinations). It is solved by the code of Structomat's free 3D frame analysis page, so the result also has a link that shows the same model and results in 3D (deflected shape, force diagrams, mode shapes). Use it to check a frame, compare sections or see how loads flow, and run it again with changed sections or loads. Elastic analysis only, not a code check: member buckling, connection design and code load combinations are not covered. Nothing is stored.

check_connection

Claude

check_steel_members

Claude

draft_project_request

Claude
Prepare an e-mail to Structomat (info@structomat.com) describing a project, ready for the user to review and send. This tool sends nothing and stores nothing; it returns the draft text and a mailto link.

estimate_portal_frame_steel

Claude
Steel tonnage estimate for a single-span pitched portal frame building (span 15-30 m) before any design: total tonnes, kg per m2 of floor, a range, the weight by part (frames, gable posts, bracing, eave struts, purlins, side rails, plates and connections) and typical member sizes. Interpolated between complete finite-element designs and calibrated against published designs. Use for budgets, tenders and feasibility; a real design needs the actual loads and code.

estimate_steel_cost

Claude

find_examples

Claude
Search Structomat's published work: steel projects, case studies, example situations, checked steel connections, measured benchmarks (e.g. scan-to-BIM from a point cloud), sample deliverables (e.g. a complete US AISC shop drawing submittal with a clouded revision, or an erectability check that finds the pieces of a clash-free model that cannot get into place during erection) and free tools. Returns titles, links and short summaries.

get_connection

Claude
Details of one connection from the Structomat steel connection library: members, plates, bolts, welds, design code and the utilisation of each component. Use find_examples with type "connection" to get slugs.

list_services

Claude
Structomat services (analysis & design, connection design, shop drawings, erectability check of a steel model before erection, automation consulting, custom tools) with what the client sends and what comes back.

Similar Apps

Listed on MCP App Store

Listed on MCP App Store

Add this badge to your site or README. It links to this page.

HTML

<a href="https://mcp-app-store.keenethics-labs.com/app/structomat"><img src="https://mcp-app-store.keenethics-labs.com/badges/listed-on-mcp-app-store.svg" alt="Listed on MCP App Store" width="220" height="44"></a>

Markdown

[![Listed on MCP App Store](https://mcp-app-store.keenethics-labs.com/badges/listed-on-mcp-app-store.svg)](https://mcp-app-store.keenethics-labs.com/app/structomat)