MCP App Store
by KeenEthics
VoltPlan icon

VoltPlan MCP Server for Claude

By YuzuHub UG

Overview

VoltPlan brings DC electrical system planning for camper vans, RVs, boats and off-grid cabins into Claude. Describe your loads, batteries and charging sources, and Claude can size the system and draw the wiring diagram for you. Tools: - Power budget: daily energy use (Wh/Ah), peak and average power from a list of loads - Battery bank sizing: required capacity and number of batteries based on days of autonomy and depth of discharge (LiFePO4, AGM, gel) - Battery configuration: series/parallel layout (e.g. 2S2P) with step-by-step wiring instructions - Solar sizing: required panel wattage from peak sun hours and system losses - Charging time: bulk and absorption estimate for solar, shore power or alternator charging - Inverter sizing: continuous and surge rating for AC loads, plus the resulting DC current draw - Wire gauge: cable cross-section from 0.75 to 240 mm² (18 AWG to 300 MCM) based on ampacity and voltage drop, with a fuse recommendation - Wiring diagram: a schematic of batteries, chargers, loads and auto-generated protection (shunt, main switch, low-voltage cutoff), with a link to open it in the VoltPlan editor, refine it and turn it into a shopping list No account required. Built by the team behind voltplan.app, the free 12V wiring diagram planner. The MCP server is open source. Results are planning aids. Have safety-critical installations checked by a qualified electrician.

How to connect

  1. Claude: Open the VoltPlan listing in the Claude connectors directory and choose Connect. Claude listing VoltPlan exposes 9 tools here.

Tools

calculate_battery_bank

Claude
Calculate the recommended battery bank size based on daily energy consumption. Accounts for days of autonomy (how many days without charging) and depth of discharge. Returns required capacity, number of batteries, and wiring configuration.

calculate_battery_config

Claude
Determine how to arrange batteries in series and/or parallel to achieve a target voltage and capacity. Returns the number of batteries needed, the wiring configuration (e.g. 2S3P), and step-by-step wiring instructions.

calculate_charging_time

Claude
Estimate how long it takes to charge a battery bank from a given state of charge to a target level. Accounts for the bulk charging phase (constant current, up to ~80% SoC) and the slower absorption phase (tapering current, 80-100% SoC). Works for any charging source: solar, shore power, alternator.

calculate_inverter_size

Claude
Calculate the recommended inverter size for running AC loads from a DC battery system. Accounts for continuous power, startup surge power (motors typically surge 2-3x), and includes a 25% headroom for the continuous rating. Returns the recommended inverter wattage and the DC current draw at system voltage.

calculate_power_budget

Claude
Calculate total daily energy consumption from a list of electrical loads. Each load specifies its power draw, how many hours per day it runs, and quantity. Returns total daily energy (Wh and Ah), peak power draw, and average power. This is typically the first step in sizing a battery bank and solar system.

calculate_solar_size

Claude
Calculate the required solar panel wattage to cover daily energy consumption. Accounts for peak sun hours at the location and system efficiency losses (MPPT conversion, wiring, temperature derating). Returns required wattage and common panel configurations.

calculate_wire_gauge

Claude
Calculate the recommended wire gauge / cable cross-section for a DC circuit. Considers both ampacity (current carrying capacity) and voltage drop to recommend the optimal cable size. Also returns total resistance, power loss, and a fuse recommendation. Supports copper conductors from 0.75 mm² (18 AWG) to 240 mm² (300 MCM).

generate_wiring_diagram

Claude
Generate an electrical wiring diagram for campers, boats, or off-grid setups. Returns the schematic as an image (batteries, chargers, protection components, loads) and a link that opens the diagram in the VoltPlan web editor for further editing. Protection components (shunt, main switch, low-voltage cutoff) are auto-generated when both batteries and loads are provided.

list_component_types

Claude
List all available component types and example configurations for building wiring diagrams. Use this to understand what parameters are needed before calling generate_wiring_diagram.

Similar Apps

Listed on MCP App Store

Listed on MCP App Store

Add this badge to your site or README. It links to this page.

HTML

<a href="https://mcp-app-store.keenethics-labs.com/app/voltplan"><img src="https://mcp-app-store.keenethics-labs.com/badges/listed-on-mcp-app-store.svg" alt="Listed on MCP App Store" width="220" height="44"></a>

Markdown

[![Listed on MCP App Store](https://mcp-app-store.keenethics-labs.com/badges/listed-on-mcp-app-store.svg)](https://mcp-app-store.keenethics-labs.com/app/voltplan)